How to Read Bmw E90 Fault Codes

If you own a BMW E90 and are interested in coding your automobile we take awesome news for you! There is a wide diverseness of codings that you lot tin carry out on BMW to customize information technology however you like.

Therefore, nosotros take created a complete list of all possible codings that you tin can carry with the Carly adapter and app for all models of the BMW E90 Serial! (E90, 91, 92, 93)

Equally you can see, the list of bachelor codings is quite long. Thus, if you are interested in a specific coding, only click on the particular and jump straight into it! In example that nosotros have we missed a lawmaking for the BMW E90, E91, E92, or E93, just leave us a comment and we will take care of it.

Bend Lighting Coding (Cornering Light)

With this coding, you tin can use the fog lights or the high beam equally a bend calorie-free. This non but looks pretty proficient simply is a good safety mensurate. Moreover, most of the time these codes for your BMW E90 (E91, E92, E93) simply work if the adaptive bend lighting is installed.

You tin can easily download the free version of the Carly app and check which functions your BMW supports . The codes in this section can be coded in the Footwell Module (FRM).

The post-obit functions tin be coded in the BMW E90 bend lighting control unit of measurement:

• Fog light or high axle can be coded as bend lighting. However, this function often just works if the adaptive curve lighting is installed.
• Bend lighting can as well exist activated when reversing. The curve lighting function must exist activated for this
• Adjust the brightness of the bend lighting on the BMW E90. (off, very low, low, medium, bright, very bright)
• Plan cornering lights to exist active or inactive for up to 3 keys

Plow Bespeak Coding

The about used role hither is probably the replacement of the standard plough signals with LED turn signals. For instance, with this coding you can avoid the error bulletin in the speedometer.

The following turn signals can be coded on your BMW E90:

• Warning indicators — single or double flashing
• How frequently information technology flashes afterward activating (1,iii,5)
• Delete fault codes after the organisation is informed of a new characteristic/ arrange the voltage monitoring
• Fix blinkers to flash when the vehicle is unlocked or locked

Moreover, we recommend activating the role that makes the plough signal blink 5 times when touched since information technology makes it easier for people to see. In add-on, 1000ost of the functions can be coded for each cardinal individually.

Brake Light Coding

With this coding you tin can make changes to the brake lights of your BMW E90. Notwithstanding, a lways brand certain that any change yous make is in line with any legal requirements in your country.

Ane really useful part is to code the Brake Strength Display. Yous tin can code the rear fog light, the normal brake lights, or the tertiary brake light every bit BFD. For example, this technique is used for Formula 1 cars to increase safety.

You can code these functions on your BMW E90 for the restriction lights:

• The Restriction Force Display can be switched on or off
• Change the minimum speed at which the Restriction Strength Display is activated
• Set the blinking speed of the Brake Force Display to fast or slow
• Activate Corona Rings as BFD

Additionally, we recommend yous to code the Brake Force Display for the normal brake lights and the third brake low-cal – information technology's great for extra safety!

Convertible Coding – BMW E93

With this code you can adjust the speed limit for the roof movement. You lot can choose between the following values:

1. half-dozen km/h
2. 30 km/h
3. 50 km/h

However, at that place's a warning! For pre-facelift models we recommend to code a maximum of 30 km/h. Otherwise, due to the weaker roof construction problems may occur.

Angel Eyes Coding

Would you like to code the Corona Rings on your BMW E90? If so, you have come up to the correct place! With this code you can turn the Corona Rings into daytime running lights (Angel Optics). This is a n absolute must for every BMW driver!

Furthermore, to use this office you have to set the following settings in the Carly for BMW app: Activate "Daytime running light" and prepare "Daytime running light individualization" to "Additional lights only".

However, this coding is only available for models with FRM2 or 3. This ways approx. from 2006/2007.

The post-obit features can be coded on your BMW E90:

• Use Corona Rings as Affections Eyes (on or off)
• Adapt the brightness of Angel Eyes at daytime running light
• Adjust the brightness of Affections Eyes at parking light
• Set the brightness of Angel Eyes as with parking light

With the Carly app and adapter you can set the Corona Rings as Angel Optics very easily for an affordable price. And then, watch out and don't get ripped off past someone who wants to charge you lot $l for that BMW E90 coding!

Corner LED Coding

Practice you want to give your BMW a cool expect from backside? These codes are a must for every BMW driver who likes to stand out. The features in this department can be coded in FRM.

These are the codings that you can perform on your BMW E90:

• Corner LEDs on or off (effect often just visible on United states models)
• The brightness of corner LEDs with agile low beam
• The brightness of corner LEDs with active high axle

Parking Assistance (PDC) Coding

Would you similar to code the parking help on your BMW E90? This setting allows you to personalize your parking assistance and display it the fashion you lot desire information technology to appear. For case, you tin view your PDC view in a landscape format for a better overview.

With this coding you can make the following changes to your BMW E90:

• Vertical PDC view (F-models)
  •  your car is shown in landscape format on the brandish
• Horizontal PDC view (E-models)
  • your car is shown in portrait format on the brandish

Moreover, you lot tin code the view of your parking assist in the Car Information Computer (CIC). This has been installed in all BMW models since 2008 and is the successor of the Automobile Communication Calculator (CCC).

Entry Aid Coding

Do you want to unlock all your doors with one click? That's possible with the correct coding! All of these codings are codable in the Car Admission Organisation.

You can make the following changes:

• Entrance assistance: When you press the unlock button twice and open the driver's door, the commuter's door window will ringlet down.
• Entrance assist key: When you lot printing the unlock push twice, all doors are unlocked and the driver's door window rolls down.

In improver, you can activate this function for all of your keys.

Window Regulator Coding

Nosotros all know the problem: You turn off the ignition and discover that the windows are withal open and you have to kickoff the motorcar once again. Abrasive, right? Well, yous can change it! This code is a must for every BMW driver who often forgets to raise their window.

These are the BMW E90 codings that y'all can perform:

• Window lifter still active (on or off) for i minute after switching off the ignition
• The window regulators are nevertheless active X minutes after switching off the ignition:
  • one infinitesimal
  • 2 minutes
  • 5 minutes
  • 10 minutes
  • 15 minutes
• Window continues to move upwardly/downwards while a door is opened
• Window continues to move up/downwards while a door is opened when the engine is running

With these piddling tricks you tin make your life much easier and it only takes a few minutes to code your BMW E90 with the Carly adapter.

Fog Light Coding

Do y'all want the fog lights of your BMW E90 to plough off automatically when y'all plow on the high beam? Here yous can discover out how to practice that!

To make changes to the loftier axle you accept to code the so-chosen FRM (footwell module). Afterwards, you tin can easily do the post-obit coding:

• Fog lamps are automatically switched off when the master beam is activated (on or off)

In determination, this is a really useful coding on the fog lights that increases safety on foggy days.

Seat belt coding

Tired of reaching the chugalug every time? We have the perfect coding for your BMW E90.

Here are some changes that you can make to your seatbelt bringer:

• Change the automatic seat belt retractor (on or off)
• Automatic seat chugalug feeder for the driver'southward seat (on or off)
• Automatic seat belt feeder for the rider (on or off)

All the in a higher place options can be coded in the FRM (Footwell Module) and have only a few minutes.

Tailgate Coding

Exercise y'all want to open up the rear window with your car key instead of the tailgate? With this simple coding you can make your life easier and save yourself some fourth dimension.

However, the post-obit changes are merely available for station carriage models:

• When yous unlock your trunk with your cardinal, the rear window opens instead of the tailgate (on or off)
• If yous unlock your torso with your outside switch, the rear window opens instead of the tailgate (on or off)
• If you unlock your body with your footwell switch, the rear window opens instead of the tailgate (on or off)

You lot can also code the to a higher place deportment for additional keys.

Coming Domicile Coding

Do yous desire to lawmaking the Coming Home function on your BMW E90? This coding is probably 1 of the most popular ones which are washed with our adapter.

The Coming Home function (also called "dwelling lights") on the BMW E90 tin can be coded quickly and easily in the FRM (footwell module).

You tin lawmaking the following:

• Coming Home function (on or off)
• If you printing the body push button on your key twice, the Coming Home function is activated. It may be necessary to activate the "Panic Alarm Remote Command" in the Car Admission Arrangement (CAS).
• The Coming Habitation function is cancelled when the headlight flasher is pressed a second time
• The Coming Home function is extended when the headlight flasher is pressed a second time
• Coming Dwelling Part duration:
  • 40 seconds
  • ninety seconds
  • 150 seconds
  • 240 seconds

In improver, these codings can also be done on the second and third keys.

The iDrive menu is primarily codable in the Automobile Information Computer (CIC). However, some codes can too exist changed in the Car Communication Calculator (CCC).

Here yous will often notice the abbreviation "DWA". This stands for an anti-theft warning system and is not installed in every BMW. However, please check if it is installed before you attempt to find a lawmaking which is non available.

You can make these codings on your BMW E90 in the CIC:

• Show carte for acoustic confirmation when open/locked in iDrive (just works if an anti-theft alarm system (DWA) is installed)
• Display accost book carte in iDrive
• Testify card for notes in iDrive

The following coding must be carried out in the CCC:

• Brandish carte du jour items for audio-visual confirmation later locking in iDrive (just works if a DWA is installed)
• Display menu items for acoustic confirmation later on unlocking in iDrive (acoustic confirmation in CCC must be activated)
• Show bill of fare items for acoustic confirmation later on locking in iDrive (audio-visual confirmation in CCC must be activated)
• Testify menu particular to change the rain light sensor in iDrive (located in the iDrive light settings)
• Menu item for the distribution of the heat from the seat heating (oftentimes merely available in five Series models with installed sport seats). Menu detail can exist establish in the iDrive climate settings
• Show menu detail for activating the cornering light in iDrive. The menu item is located in the iDrive low-cal settings (often only works if the adjustable cornering calorie-free is installed)

iDrive Warnings Coding

Do y'all want to know immediately if something is wrong with your iDrive arrangement? We'll show y'all how to code the iDrive warnings on your BMW E90.

Hither are the bachelor codings:

• Alarm is displayed when starting the iDrive system (on or off). However, this coding is usually simply available for US models.
• iDrive alert display elapsing:
  • 10 seconds
  • Non active
• Warning for rear view camera:
  • Active
  • Active for 6 seconds
  • Non agile
• Warning for night vision camera:
  • Agile
  • Active for 6 seconds
  • Not agile

In determination, with these elementary BMW E90 codings yous tin add new features to your car and likewise be safer on the road.

Interior Lighting Coding

Wouldn't it be cool to illuminate your car from the within before you lot get in? This is possible by coding the interior lighting in your BMW E90.

Still, to code your interior light yous have to make some changes in your Machine Admission Organization (CAS) or your Footwell Module (FRM).

Y'all can perform all of these codings on your BMW E90:

• When you press the "lock push" on your locked BMW, the interior lighting is activated and tin can be coded in the CAS (on or off)
• Interior lighting is automatically switched off after 2 minutes and can be coded in the FRM (on or off)
• Interior lights switch on or off slowly  and tin be coded in the FRM.

Fortunately, these codes are really easy to do with the Carly adapter. You don't demand a laptop or cable. You only demand the Carly adapter, a phone, and the Carly app.

Air-conditioning System Coding

Information technology'due south happened to all of us… You become out of your perfectly heated car for a bit and just like that the "perfect car climate" is gone!. Today nosotros show you how y'all can go along the temperature on your BMW E90!

The IHKA system is the control unit for the air-conditioning and heating and is located in the front of the and so-called splashboard to the engine compartment, between the commuter and rider footwell.

You tin can practise the following coding on your BMW E90:

• Your recirculation settings will be saved for the next beginning after you accept switched off the engine (on or off)
• "Auto" is displayed in automatic mode of the air conditioner (on or off)
• The current blower level is likewise displayed in the automatic mode of the air conditioner (on or off)
• Fan icon is displayed for fans (on or off)
• Off manner for the air conditioner is saved (on or off)
• Air conditioner switches on automatically when switching to automated air conditioning. Furthermore, to disable this you have to disable (on or off) all options for "automatic compressor for A/C".
• By pressing the "ALL" push, the balance heat function of the air conditioner is activated (on or off)

Most importantly, All codes tin be hands coded in the IHKA organisation.

On-board Figurer Coding

Is the speed on your digital speedometer displayed incorrectly? With these simple tricks you tin hands lawmaking this at home and you lot don't need to drive to a garage.

The following codes should all be coded in the KOMBI module:

• Speed is shown in the digital brandish beneath the speedometer (on or off)
• Correction of digital speedometer:

• Bodily speed
• Corrected speed

Past default, the speed of the speedometer is corrected upwards. Thus, the digital speedometer shows a few more km/h.
Correction of analog tachometer:

• bodily speed
• corrected speed

Past default, the speed of the speedometer is corrected upwards. So, the speedometer needle shows a few more than km/h.

• By changing the information displays with the onboard computer button (BC push) an empty menu item is displayed (on or off)
• Time is corrected (on or off) using GPS
• Continuous speedo illumination fifty-fifty during the day (on or off)
• Current consumption is displayed in the on-board computer (on or off)
• Set speed for cruise control is displayed for 0/3/6 seconds
• Daytime running light can be switched on/off in the on-board computer. If an iDrive organization is installed this coding may not work
• Low-cal sensitivity can exist adjusted in the on-board computer. May not work if an iDrive system is installed
• Shift calorie-free indicator is shown on the on-lath reckoner. To use these functions, other settings for "Shift point display" must also be activated. Especially automated transmissions practise not transmit the data to the KOMBI module. Therefore, it is possible that the shift point indicator is non agile or does not point a gear permanently.
• Code shift signal indicator for key one, 2, and 3

As you can see, you have a lot of possibilities to spice up your BMW E90 and give it some cool features that your friends might not accept.

Comfort Features Coding

• Maintain start/finish push pressed: Ejects cardinal when the engine is switched off
• Tap the ignition key once to get-go the automobile
• Maintain pressed the unlock button on your central: will open all windows including the sunroof
• Maintain pressed lock button on your primal: will open all windows including the sunroof
• When unlocking the machine with your key (turn the key to the correct and hold it in the keyhole for a few seconds), all windows including the sunroof volition open
• When locking the car with your central (plow the key to the correct and concord it in the keyhole for a few seconds), all windows including the sunroof close
• If the auto door handle has a touch sensitive surface and if it is touched for a longer fourth dimension, all windows, including the sunroof, volition be closed (only possible for cars with built-in Comfort Admission)
• Side mirrors fold in when the lock fundamental is held downwards. They fold out again when the car is unlocked.

To employ the coding "Comfort folding in and out for side mirrors", it must be activated in the footwell module (FRM). Additionally, "comfort opening transmitter" and "comfort closing transmitter" must be activated. (Transmitter stands for key in this case).

• Filibuster the folding of the mirrors:
  • No delay
  • 0.5 seconds
  • 1.v seconds
• Deactivation by switching off this coding

This part is not bachelor with a retrofitted Comfort Access. Moreover, when the Condolement Access is deactivated, neither closing nor opening the vehicle with the door handle will piece of work. The car tin but be switched on/off when the key is in the ignition. Therefore, the "Keyless Become" function is no longer possible. This reduces the risk of the car being stolen.

Above all, these codes tin exist inverse in the Car Admission System (CAS) and are accessible for everyone.

Headlight Flasher Coding

Are y'all wondering how to apply your high quality Bi-Xenon headlamps with a headlamp flasher to warning the driver in front of you? Find out how you lot can code exactly that in your BMW E90.

Bi-Xenon headlights are extremely bright and give the driver a ameliorate view of the route when it is dark. Moreover, you tin can besides employ them to let a auto in forepart of you know that you want to laissez passer. With these headlights, you're guaranteed non to go unnoticed. This might be a bit clichéd for a BMW commuter, simply it's also for condom. Thus, it's a very sensible coding on the BMW E90.

You lot have the following options:

• With a headlight flasher, the Bi-Xenon headlights are activated (on or off)
• Fog lights are automatically switched off when the headlights are turned on

To utilise your Bi-Xenon headlights with a headlight flasher, you have to brand the above mentioned change in the Footwell Module (FRM).

Offset/Cease Retentivity Coding

You're standing at a traffic light and the engine shuts off, even though you don't want it to. Many drivers have this trouble and unfortunately you can't disable this permanently in the settings. However, we will show you how to change this on your BMW E90 and so that you don't accept to press the push every fourth dimension to switch off the first/stop function.

First of all, a brusque note: by disabling the automatic kickoff/finish office you tin extend the lifetime of the battery and the starter. This is an advantage especially when the engine is common cold.

Moreover, to activate this part you have to brand the following codings on your BMW E90:

• Once you lot prepare your stop/kickoff function, it volition be automatically saved. Whether the Outset/End system is on or off it will be saved for the side by side kickoff.

To sum up, deactivating the Offset/Stop-Automated on the car can increase the life fourth dimension of the battery and the starter. Additionally, y ou tin make this change in the IHKA system of your BMW.

Lock Coding

Are y'all ever worried that someone might unexpectedly try to get into your car at a traffic calorie-free? At that place are modifications you lot tin can make to your car to prevent the doors from beingness accidentally unlocked!

You can brand the following changes in the Auto Admission System (CAS):

• I-time unlocking with the central only unlocks the driver'due south door. A second unlocking unlocks all doors (tin exist coded with key 1/2/three/)
• Tank flap is unlocked later a single unlocking if the in a higher place-mentioned coding is too activated
• All doors are unlocked when the central is ejected. Just works in connexion with the coding "Locking off x km/h for transmitter one-4".
• You can carry out these codes in the footwell module (FRM) or in the anti-theft warning system module (DWA):
• Visual confirmation when unlocking the car (on or off) and tin can be coded separately for keys i, 2, and 3
• Acoustic confirmation when unlocking the car

In conclusion, these uncomplicated codes on the lock can make your life a little ameliorate and are very easy to implement.

Windscreen Wiper Coding

Is your wiper too boring or do you want to change the intervals? That'due south easy enough! You can make these changes on your BMW E90:

• Betwixt wiping actions the interval length can be set to 3 or 5 seconds
• Interval length of 2/4/6/viii or 12 seconds for the rear window wiper
• Rear window wiper is switched on automatically when the window wiper is activated and contrary gear is engaged
• Windshield wipers return to their original position when the ignition is switched off and do not stop in the middle of the windshield
• Wipers wipe ten seconds after the windshield cleaning nozzles are activated:
  • 0.1 seconds
  • 0.3 seconds
  • 0.5 seconds
  • 0.7 seconds
• Rear window wiper starts x seconds after the window cleaning nozzles accept been activated:
  • 0.1 seconds
  • 0.3 seconds
  • 0.5 seconds
  • 0.7 seconds
• Between one-4 wiping cycles are performed later the windshield cleaning operation
• Headlight cleaning (on or off)
• Headlights are cleaned every time the windshield is cleaned
  • 3 times windscreen cleaning
  • v times windscreen cleaning
  • 7 times windscreen cleaning
• 2 or 3 spray pulses are emitted for cleaning the headlights
• Duration of the private spray pulses for cleaning the headlights:
  • 0.five seconds
  • 0.7 seconds
  • ane second
• Elapsing of the pauses between the individual spray pulses for cleaning the headlights:
  • 1 second
  • 1.3 seconds
  • ane.five seconds

The above codes are all codable in the JBBF module.

BMW E90 Automatic Shut-off Coding

Do yous want your auto to automatically lock itself at 12 km/h? Here nosotros'll show you how y'all can easily make such changes to your BMW E90.

These codings are possible:

• The tailgate cannot exist unlocked when the motorcar is locked
• If the car was unlocked only no doors or windows were opened, information technology will lock again after 1/ii/5/10/15 minutes
• The machine is locked as before long as the ignition is active
• Vehicle is automatically locked at ii/6/12/18/24/30 km/h

To employ this part "Locking at x km/h", information technology must be activated for the respective primal. Additionally, the coding is available for all your keys and tin can also be set differently for each key.

BMW E90 Side Marker Coding (The states Side Mark)

Practice you desire to give your BMW E90 a cool expect with Usa side markers? Here you can discover out exactly how you can practice that.

The United states side marker options are all codable in the footwell module (FRM) and tin can be changed with a few unproblematic steps even by non-mechanics.

These are the changes you need to brand:

• Brand the side markers permanently active. If "Side marker (US)" options are available, they must be set to "active" to activate the side markers. Information technology's possible that warnings will be shown on the dashboard. To remove them, you have to deactivate the voltage monitoring of the turn signals. This often happens on not-Us models.

• Modify the effulgence of the side markers:
  • Off
  • Very low
  • Low
  • Rather low
  • Medium
  • Rather bright
  • Bright
  • Very bright

Seat Heater Coding

Almost every BMW commuter knows this problem — it's winter and icicles are hanging exterior. Equally soon equally you become into the car, you plow on the seat heating. But the menu item is not displayed and you don't know which level is currently prepare. We'll show you how to solve this problem and how you can see the current level of the seat heating on your iDrive screen each time y'all go in the auto.

The following codes are possible:

• Prove the current level of seat heating for driver and passenger in the iDrive menu
• Seat heating menu is automatically displayed for a few seconds in one case the seat heating has been switched on. This function is often only available on 5 Serial models.

All codes tin can exist coded in the Car Communication Computer (CCC).

Voltage Monitoring Coding for your BMW E90

To be able to code your BMW E90 you lot accept to make sure that the voltage monitor is switched off. This concerns codings such as the side markers or the Corona Rings. Here you can observe out how exactly you tin can do this and what y'all should pay attention to.

If you practise any coding on your side markers or Corona Rings, it tin frequently happen that your BMW displays a warning concerning the voltage monitoring. Well-nigh of the time yous can just ignore it. However, the grab is that the voltage monitor automatically interrupts the current flow to the area for a short time, resulting in an annoying flickering.

The following voltage monitors can exist switched off on your BMW E90:

Headlights:

Voltage monitoring plays an of import role in giving codes their total power. For example, this is the case with the United states side markers to forbid possible flickering. All the same, undesirable interference can as well occur with codes on Corona Rings, fog lights, high beams, or low beams. To forbid these, you simply have to switch off the voltage monitoring for the desired area.

Plough Signals:

As with the various lights, it is every bit of import to turn off the voltage monitoring for the front and rear turn signals if changes have been fabricated to these areas.

Brake Lights:

Restriction lights can also cause complications. As ever, information technology is important to conciliate the voltage monitoring for the brake lights, inner brake low-cal, and the tertiary brake calorie-free to attain the best results.

Rear Lights:

The voltage monitoring of the rear lights is very important because the condom of the vehicle is also at stake here. If the voltage monitoring is activated and there is a flickering or consummate failure of the rear lights, the safety of the driver is no longer guaranteed. But equally always you tin easily conciliate the voltage monitoring if changes have been made to the mentioned areas.

Other:

With these codes, rubber is not an issue, merely your wallet may endure. For example, flickering or failure of the license plate low-cal at dark is a crime in some places since the license plate must e'er be recognizable. However, an active voltage monitoring for the right or left rear fog lite can take consequences. Therefore, always switch off the voltage monitoring for the coded area to avoid possible fines.

All codings are codable in the footwell module (FRM).

Mirror Coding

You're driving your BMW E90 on the highway at dark and all of a sudden it happens: Yous are blinded by a driver behind yous. Coding the dimming function of your BMW E90 can assistance forestall this upshot.

In order to use any kind of coding, you start have to activate the mirror tilt function in your footwell module (FRM).

In improver, a then-called "Local Interconnect Network" (LIN or as well chosen LIN-Bus) must be installed. This is responsible for the networking of sensors and actuators in the vehicle and is available in BMWs with exterior mirror heating.

And then you lot tin can make the post-obit changes:

• Tilt the passenger mirror when using contrary gear to observe curb edges. The mirror is returned to its original position at a speed of 15-20 km/h.
• When the lock push is pressed for a longer menstruation of time, the outside mirrors fold in. When you unlock your BMW, they fold out again (may require a coding in the Auto Access System)
• Automatically dimming mirrors when lite falls on the light sensor in the mirror

Coding "Tilt mirror" has already saved quite a few rims. It is super fast and piece of cake to lawmaking with the Carly adapter.

Parking Lite Coding

Would you like to code the parking calorie-free of your BMW E90 in such a style that it only stops shining when the car is locked? That's piece of cake enough! You can exercise the following:

• Set the parking light to turn off when the car is locked. To use this function, y'all first have to prepare your lights to dim or automatic mode.

This coding only takes a few minutes and is definitely piece of cake plenty for everyone to exercise without a trip to the garage.

Speedometer Coding

Practise you desire a digital speed display under the analog speedometer? Here yous can detect out how you can code that in your BMW E90.

You lot can make the following changes:

• Show the speed on the display beneath your analog speedometer
• Change of the digital speedometer:
  • Prove actual speed
  • Prove corrected speed

The speed of your digital speedometer is corrected upwards by default. And so you lot will see a few more km/h

• Change of the analog tachometer:
  • Show actual speed
  • Show corrected speed

The speed of your analog speedo is as well corrected upwards by default. Moreover, all codes tin exist coded in the KOMBI module with the Carly app and adapter.

Daytime Running Light Coding

Allow's look at how you lot can lawmaking your daytime running lights yourself.

• The daytime running light tin exist switched on/off in the on-board estimator. This function oft does non work if an iDrive system is installed
• "Daytime running lite 1" (DRL) is activated when the calorie-free controller is fix to "0". Works only in connectedness with "Daytime running low-cal 2"
• "Daytime running light 2" (DRL) is activated when the light controller is fix to "0". Works only if "Daytime running lite 1" is activated
• Dissever settings for daytime running lights for keys 1/2/three
• Daytime running light individualization
  • off
  • Blinker dimmed
  • High beam dimmed

• Daytime running lite individualization (meaning the following lights can be used as daytime running lights):
  • Off
  • Dipped beam
  • High beam
  • Merely boosted lights (Eu)
  • Only boosted lights (Us)

These codes are merely bachelor for BMWs with FRM 2 or FRM 3. These were installed in the BMW E90 from about 2006 onwards.

Daytime Running Light Coding (Effulgence)

• Effulgence of the daytime running low-cal:
  • Very low
  • Low
  • Medium
  • Brilliant
  • Very brilliant

To use this coding, the function "Daytime running light individualization" must be activated. Furthermore, this coding is only possible for BMWs equipped with FRM two or FRM iii. These were installed in the BMW E90 from about 2006 onwards.

• Daytime running light, coding the brightness of the loftier beam:
  • Off
  • Very low
  • Depression
  • Rather low
  • Medium
  • Vivid
  • Very bright

To use the high beam equally daytime running calorie-free, the coding "Daytime running calorie-free – individualization" must be set to "Daytime running light".

Moreover, information technology is possible to actuate various lights at the same time as daytime running light. In combination with the normal daytime running light, yous can too utilize fog lights, front turn signals, Corona Rings, side markers, license plate lite, rear lights, and inner or third brake light to spice upward your BMW.

Furthermore, it is possible to activate several lights with the daytime running calorie-free. This is easy to lawmaking and looks pretty cool!

• Coding the effulgence of the fog lights, Corona Rings, or tail lights. Here you can cull between the following options:
  • Off
  • Very low
  • Low
  • Rather low
  • Medium
  • Rather bright
  • Bright
  • Very vivid

This function is only available on BMWs equipped with FRM 2 or FRM iii. Moreover, there can be problems with the Corona Rings. If the normal coding of the brightness does not piece of work, you have to utilise the culling brightness change of the Corona Rings.

• Daytime running light settings:
  • Standard
  • Permanently on
  • Permanently off

If the "Default" or "Prove menu item" pick is enabled, an additional bill of fare item is displayed in the iDrive arrangement to suit the daytime running light mode.

All coding can be washed in the Footwell Module (FRM), KOMBI, or Car Information Computer (CIC).

Gas Tank Coding

You lot know information technology well, y'all're driving your BMW E90 and and so the shrill beeps of the reserve tank warning starts. Merely you don't know how much you accept left in the tank. Well, now you can find out!

Yous accept the following options:

• Acoustic range warning:
  • off
  • 20 km
  • 50 km

• Tank reserve warning:
  • half dozen.5l
  • 8.0l
  • 10.0l
  • 12.5l
  • twenty.0l

All changes must be made in the KOMBI module.

Phone Coding

Exercise you want a different ringtone when someone calls you while you're continued to your BMW E90?

You can make the following changes:

• Change phone ringtone (codable in CIC):
  • BMW
  • Mini

This merely applies if your cell phone is connected to your BMW E90 and does not apply to calls outside your automobile.

Clock Coding

Currently, the clock is inverse twice a year. Nevertheless, it's like shooting fish in a barrel to forget to change your clock and miss an appointment because of it. Luckily, you tin easily avert this and go your BMW E90 prepare for the time change.

It is every bit simple as that: In the KOMBI module yous can easily set the time to be updated automatically, along with the GPS.

Video Shown While Driving

Practise you lot want your passengers to exist able to spotter videos or DVDs while you're driving? Here yous can find out how to do this at college speeds.

You have the following options:

• "Video/DVD while riding one″(on or off)
• Alter "Video/DVD while driving ii" (only in connection with the coding above)
• Video active while driving:
  • At walking speed
  • With applied handbrake
  • During the ride
  • Non active

You lot can only do these codings if your BMW E90 supports DVD or TV while stationary. If this is the instance, the changes tin easily be coded in the Car Information Computer (CIC). However, please exist condom and do not lookout videos while driving!

Alarm System Automobile Coding

This is a very absurd feature which makes your beloved BMW safer and at the aforementioned time is easy to do yourself. Hither you tin can find out how to code the alarm system of your BMW E90.

You tin make the following changes:

• Press the "open trunk" button for a longer time to activate the warning
• To turn the warning organisation off/on:
  • Enable use of the remote control to turn alarm organisation off/on
  • Enable utilise of the remote command and lock to turn warning organization off/on

• Alarm is triggered by pressing and holding the "Unlock tailgate" button
• When the alert is active, the low beam, loftier beam, or hazard lights start flashing
• You can cull between different alarm types. You have the post-obit options:
  • Europe
  • USA
  • Dandy Britain (aforementioned equally Europe simply 8 times longer)
• Display bill of fare items for audio-visual confirmation subsequently locking in iDrive (only works if a DWA is installed)
• Display menu items for acoustic confirmation subsequently unlocking in iDrive (acoustic confirmation in CCC must exist activated)
• Prove menu items for acoustic confirmation subsequently locking in iDrive (acoustic confirmation in CCC must be activated)

Warnings Coding for BMW E90

Often you don't even notice that something is wrong with your car. Almost everyone has brought their car to the garage and seen them observe an event you knew nothing nigh. This tin not but mean unforeseen costs, but also bear on the safety of driving. Therefore, permit'south take a await at how you lot can add warnings to your BMW E90 to detect possible faults earlier.

The following warnings are available to you lot:

• Speed limit alert is displayed at:
  • off
  • 120 km/h
  • 190 km/h
  • 210 km/h
  • 240 km/h
• Warning when the outdoor temperature drops below four °C (on or off)
• A warning is activated if the key is left in the ignition afterwards the engine is switched off
• Acoustic range warning goes off at :
  • twenty km
  • 50 km
• Tank reserve warning:
  • half dozen.5l
  • 8.0l
  • 10.0l
  • 12.5l
  • 20.0l
• Alarm if headlights are nevertheless on while a driver's door is open
• Malfunction of the Corona Rings or parking light is indicated with a warning in the on-board computer
• Malfunction of the front turn signals is indicated with a warning in the on-board computer
• Fault in the fog lights is indicated with a warning in the on-board reckoner
• Malfunction of the primary beam, dipped beam, rear or front plough indicators, finish light, third stop light, inner or outer cease light, rear calorie-free, reverse light, license plate calorie-free or rear fog light is indicated with a warning in the trip reckoner
• Reminder for the commuter to fasten his seat belt (on or off)
• Reminder for the passenger to fasten his seat belt (on or off)

Simply check out what'southward possible with the Carly app. Increasing your prophylactic through advisable warnings is definitely worth a expect.

Welcome Light Coding

The Welcome Light is an eye-catcher and is a must for every BMW E90 driver. It is very easy to actuate and nosotros will show you some cool tricks to make it stand out even more.

Here are the available codings for your BMW E90:

• Welcome Light is switched on when the auto is unlocked. The light switch within the BMW must be set to "Auto".
• Split up settings for the Welcome Light for keys 1, two, and iii
• You tin code the length of the Welcome Light yourself. The post-obit options are available:
  • off
  • 5 seconds
  • 10 seconds
  • 20 seconds
  • 40 seconds
  • 90 seconds
  • 150 seconds
  • 240 seconds
• In addition to the welcome light, the low beam, third brake light, stop light, front or rear blinker, side markers, high axle, license plate low-cal, rear fog light, forepart or rear parking low-cal, fog lights or corner LEDs can also be switched on. You lot can choose between three different options:
  • off
  • switch on gradually
  • switch on instantly

Moreover, sometimes the coding "Side marking (US) Brightness" must exist set to "depression" or "dimmer" f or the coding to work. Notice that s mooth switching on of the corner LEDs is non possible due to the construction of LEDs.

Start-Stop System

Quickly activate the automated Start/Stop selection on your motorcar! The idea behind the system is unproblematic: If the engine is stopped for brusque periods, for case, while waiting at traffic lights, fuel consumption and emissions are reduced.

Caput-Upward Brandish

Code the Caput Up Display on your vehicle to look how you want it with the Carly app and adapter.

Similar having your own mechanic!

tostadoponim1983.blogspot.com

Source: https://www.mycarly.com/blog/car-coding/bmw-e90-coding-full-guide-for-coding-your-car/